cold drawing
英 [kəʊld ˈdrɔːɪŋ]
美 [koʊld ˈdrɔːɪŋ]
冷拉伸
双语例句
- Controlling of chemical composition, melting and casting, three-roll hot-rolling and cold drawing were quested.
主要从化学成分控制、熔炼铸造、三辊热轧和冷拔矫直方面进行了试验研究。 - In this artide, feasibility analysis of the technology of cold drawing with core mandrel for the propeller shaft tube stock has been made and technological testing carried out.
对加工传动轴管采用的带芯冷拔工艺进行了可行性分析，并进行了工艺试验。 - Analysis on Pencil-Tip Shaped Fracture of Cord Steel 72A during Cold Drawing and Improvement of Process
72A帘线钢线材冷拔笔尖状断裂分析和改进工艺措施 - Effects of cold drawing and water quench process on mechanical properties of prestressed wires have been studied in laboratory.
在实验室条件下研究了冷拔与水淬火工艺对予应力钢丝力学性能的影响。 - The effect of cold drawing on aggregation structure of PET fiber and the rebounding performance of PET fibers were studied, and the elasticity recovering mechanism of PTT fiber was discussed.
研究了冷拉伸对聚酯纤维聚集态结构、聚酯纤维回弹性能的影响，并讨论了PTT纤维的弹性回复机理。 - The cold drawing and water quench process which enable the mechanical properties of wires reaching specified demand of present standards are determined.
确定了能使钢丝力学性能达到现行标准规定要求的冷拔与水淬火工艺。 - The Cu-6% Ag filamentary composite was prepared by cold drawing combined with intermediate heat treatments.
通过大变形冷拉拔结合中间热处理制备了纤维相增强的Cu-6%Ag合金，研究了合金在不同加工状态下的显微组织及纤维相的形成过程。 - Study on Improving the Application Reliability of the Inner Mould of Cold Drawing
提高冷拔内模使用可靠性的研究 - This paper introduces the cold drawing and rotary forging precision forming technology of pin parts. The determination of technological parameters, product quality and finite element simulation of deformation mechanism is studied.
介绍销类件冷拔摆辗精密成形工艺，对工艺参数的确定、产品质量和变形机理的有限元模拟等问题进行了研究。 - Micro-structure and properties of 10 Ti steel wire after intercritical quenching and cold drawing have been studied.
本文研究了10Ti钢亚温淬火及冷拔变形后的组织和性能。 - The Application of B-Spline Function and Elastoplastic FEM In The Process of Cold Drawing
B样条和弹塑性有限元在冷冲压拉延成形中的应用 - The technological procedure of cold drawing was introduced.
对冷拉伸实施步骤进行了介绍。 - This paper states the basic principle of operation of cold drawing and straightening machine. It derives basic formula to determine the major size and parameters.
说明了该冷拉调直机的基本工作原理，推导了确定关键尺寸参数的基本公式。 - An analysis is made with the reliability design of the main link-plate of LB-20 mono-chain pipe cold drawing mill.
对LB-20单链冷拔管机的主链条链板进行了可靠性设计分析。 - The paper introduces CAD system of steel tube cold drawing process which is a software with optimum function developed by Iron& steel General Institute on basis of computer imitation technology.
介绍了北京钢铁研究总院采用计算机仿真技术与计算机辅助设计技术，开发出具有优化功能的钢管冷拔过程CAD系统通用软件。 - This paper introduces a new method to produce a duplex matal tube, which is a precious metal tube composed with a common metal tube after cold drawing and diffused at high temperature for a certain period of time.
本文介绍了一种生产双金属管的新方法，即将贵金属管与一般金属管进行组合、冷拉后在高温下经过较长时间扩散的方法。 - Effects of die tapers on forming and stress parameters of INSIDE-THREADED pipe cold drawing
模具锥角对冷拔内螺纹管成型及力能参数的影响 - Study on the Technology of Cold Rolling and Cold Drawing Fe-Cr-Al Alloy
Fe-Cr-Al合金冷轧及冷拔工艺性研究 - The production capacity of a steel tube cold drawing ( rolling) workshop is calculated with the help of solving linear regular problems using the simplicial method.
本文借助单纯形法解线性规划问题的原理，推导出了冷拔（轧）无缝钢管车间生产能力的计算方法。 - The Internal Defects of Wire Rods and Influence on Cold Drawing Fracture
盘条内部缺陷及对冷拉断裂的影响 - The tensile strength of cold drawing alloy is higher than that of annealing one.
拉拔试样的抗拉强度远高于退火试样； - Effect of Cold Drawing on Aggregation Structure and Rebounding Performance of PET Fibers
冷拉伸对聚酯纤维聚集态结构和回弹性的影响 - The surface defect of the wire rod is closely related with the defects of the billets ( such as longitudinal crack, subsurface blowhole and entrapped slag) as well as scratch taking place in the process of hot rolling and cold drawing.
线状缺陷与铸坯缺陷（如纵裂纹、皮下气泡、夹渣等）以及热轧和冷拉拔过程中产生的划伤有关。 - And Al-Li alloy is insensitive to natural ageing after cold drawing deformation.
冷拔后自然时效对Al－Li合金不敏感。 - Phase Transformation of Steel Wire in Cold Drawing Process
钢丝在冷拔过程中的相变 - Application of Technique of the Cold Drawing Precise Steel Pipe in Hydraulic Cylinder of Construction Machinery
冷拔精密钢管技术在工程机械液压缸中的应用 - Cu-Fe-Cr in-situ composite wires were manufactured by cold drawing and Fe-Cr fibers were extracted from them.
采用拉拔变形法制备了Cu-Fe-Cr原位复合材料，并从线材中提取出Fe-Cr纤维。 - The factors relating the corrosion of tubes such as the grain size, cold drawing deformation degree and heat treatment process were studied either.
研究了晶粒尺寸、冷拉拔变形程度、热处理工艺等因素对管材腐蚀性能的影响。